• PRODUCTS
  • COMPANY
  • CONTACTS
PRODUCTS
Cart
0Prod.

You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Halder - EH 23271.: Eccentric Clamps

The eccentric clamp allows clamping with pull-down effect on different workpiece forms at low height.

Material

  • Case-hardened steel, case-hardened and blue zinc-plated

Assembly

  • Manufacture a thread with the corresponding distance L2 / L3 to the workpiece.
  • Screw in the eccentric clamp at the necessary height and set it relative to the workpiece with its flat side.
  • Insert the workpiece and tighten the clamping pin using the internal hexagon. The proper tension is achieved after approx. 1/3 turn.

The threaded hole must be lubricated on a regular basis.

The rotational movement during tightening must always be completed towards the stops in order to prevent the workpiece from turning away from the stops.

Select a product
Codice Product Name Qty & Cart
23271.0003 Eccentric Clamps | d1=M3 | 23271.0003  REGISTER /
23271.0004 Eccentric Clamps | d1=M4 | 23271.0004  REGISTER /
23271.0005 Eccentric Clamps | d1=M5 | 23271.0005  REGISTER /
23271.0006 Eccentric Clamps | d1=M6 | 23271.0006  REGISTER /
23271.0008 Eccentric Clamps | d1=M8 | 23271.0008  REGISTER /
23271.0010 Eccentric Clamps | d1=M10 | 23271.0010  REGISTER /
23271.0012 Eccentric Clamps | d1=M12 | 23271.0012  REGISTER /

Availability: In stock

100% Secure Payment

Reviews

EH 23271.: Eccentric Clamps

Nessuna recensione attualmente

Scrivine una adesso !

Only registered users can write reviews. Please, log in or register