Halder - EH 23210.: Down-Hold Clamps ‒ without clamping lever
By tightening the ball-ended thrust screw the workpiece is simultaneously pressed towards the stops and fixture plate. The favourable leverage enables high horizontal clamping forces. When using T-nuts EH 23010. / EH 23020. (DIN 508) they can also be applied to other slot sizes.
Material
- Steel, case-hardened, blackened, ground
Select a product
| Codice | Product Name | Qty & Cart |
|---|---|---|
| 23210.0501 | Down-Hold Clamps, without clamping lever/with flat clamping jaw | T-slot size=10 mm / d1=M8 | 23210.0501 | REGISTER / LOGIN |
| 23210.0521 | Down-Hold Clamps, without clamping lever/with flat clamping jaw | T-slot size=14 mm / d1=M12 | 23210.0521 | REGISTER / LOGIN |
| 23210.0541 | Down-Hold Clamps, without clamping lever/with flat clamping jaw | T-slot size=18 mm / d1=M16 | 23210.0541 | REGISTER / LOGIN |
| 23210.0502 | Down-Hold Clamps, without clamping lever/with V-clamping jaw | T-slot size=10 mm / d1=M8 | 23210.0502 | REGISTER / LOGIN |
| 23210.0522 | Down-Hold Clamps, without clamping lever/with V-clamping jaw | T-slot size=14 mm / d1=M12 | 23210.0522 | REGISTER / LOGIN |
| 23210.0542 | Down-Hold Clamps, without clamping lever/with V-clamping jaw | T-slot size=18 mm / d1=M16 | 23210.0542 | REGISTER / LOGIN |
Availability: In stock
100% Secure Payment
