Product was successfully added to your shopping cart.

Halder - EH 23320.: Clamping Jaws ‒ for floating clamp M 12

The clamping jaws can be used for the floating clamps 23320.0008, 23320.0012 and 23320.0014.

The upper clamping jaw (23320.0054, 23320.0056 abd 23320.0058 - picture 1-3) can be used to increase the clamping range.

In the upper clamping jaw with female thread M 8 (23320.0154 / .0156 - picture 4 + 5) different standard parts can be screwed in as required.

The lower clamping jaw with pivot function (23320.0148 - picture 6) adapts to the draughts of the workpiece.

Material

Clamping Jaws

  • Case hardened steel, nitrided, manganese phosphate treated

Notes

The tightening torque of the floating clamp must be adapted/reduced situationally. Observe the surface pressure due the the reduced contact surface of the clamping jaws.

Select a product
Codice Product Name Qty & Cart
23320.0054 Clamping Jaws, for floating clamp M 12/upper exchange clamping jaw | Clamping range of=4 mm / Clamping range to=16 mm | 23320.0054  REGISTER /
23320.0056 Clamping Jaws, for floating clamp M 12/upper exchange clamping jaw | Clamping range of=15 mm / Clamping range to=27 mm | 23320.0056  REGISTER /
23320.0058 Clamping Jaws, for floating clamp M 12/upper exchange clamping jaw | Clamping range of=26 mm / Clamping range to=38 mm | 23320.0058  REGISTER /
23320.0154 Clamping Jaws, for floating clamp M 12/upper clamping jaw with location hole | Clamping range to=29 mm / to2=23 mm | 23320.0154  REGISTER /
23320.0156 Clamping Jaws, for floating clamp M 12/upper clamping jaw with location hole | Clamping range to=40 mm / to2=34 mm | 23320.0156  REGISTER /
23320.0148 Clamping Jaws, for floating clamp M 12/lower clamping jaw with flat-faced ball and pivot function, plain surface, protected against rotating | 23320.0148  REGISTER /

Availability: In stock

100% Secure Payment