Halder - EH 22720.: Ball-Ended Thrust Screws ‒ headless, short
Ball-ended thrust screws, short execution, are particularly suitable for parallel shanks DIN 1835 E in combination, for instance, with Whistle Notch and Weldon Tool Holding Fixtures.
For clamping and supporting of surfaces that are not exactly parallel.
Maximised load transmission due to moveable ball.
Material
Ball
- Ball-bearing steel, hardened
Screw
- Heat-treated steel, 1200 ±100 N/mm2
Notes
Fully rotating ball.
Special types on request.
References
Thread lock on request, please refer to appendix - Technical Data -
Select a product
| Codice | Product Name | Qty & Cart |
|---|---|---|
| 22720.0641 | Ball-Ended Thrust Screws, headless, short/flat-faced ball, plain surface, for parallel shanks DIN 1835 E | d1=M14 / l2=16 mm | 22720.0641 | REGISTER / LOGIN |
| 22720.0660 | Ball-Ended Thrust Screws, headless, short/flat-faced ball, plain surface, for parallel shanks DIN 1835 E | d1=M16 / l2=16 mm | 22720.0660 | REGISTER / LOGIN |
| 22720.0682 | Ball-Ended Thrust Screws, headless, short/flat-faced ball, plain surface, for parallel shanks DIN 1835 E | d1=M18 x 2 / l2=20 mm | 22720.0682 | REGISTER / LOGIN |
| 22720.0692 | Ball-Ended Thrust Screws, headless, short/flat-faced ball, plain surface, for parallel shanks DIN 1835 E | d1=M20 x 2 / l2=20 mm | 22720.0692 | REGISTER / LOGIN |
| 22720.0693 | Ball-Ended Thrust Screws, headless, short/flat-faced ball, plain surface, for parallel shanks DIN 1835 E | d1=M20 x 2 / l2=25 mm | 22720.0693 | REGISTER / LOGIN |
| 22720.0730 | Ball-Ended Thrust Screws, headless, short/flat-faced ball, plain surface, for parallel shanks DIN 1835 E | d1=M24 x 2 / l2=25 mm | 22720.0730 | REGISTER / LOGIN |
Availability: In stock
100% Secure Payment
