Halder - EH 22330.: Locating Bushings ‒ for sling swivels

The locating bushings are the counterpart to the sling swivels. 

The locating bushings are made from stainless steel. There are two versions available that can be mounted into wood (picture 1 and picture 3) and one version that can be mounted into plastic (picture 2). Both bushings in picture 1 and picture 2 allow an interlock of 4x90°. The bushing in picture 3 enables a 360° rotation in the locked state. There is an uncoated variant available in addition to the black standard version.

Log on to www.push-and-go.eu for such additional products such as SLIM sling swivel, SLIM bushings and clamp collars (for shotguns). You can also place orders directly with PUSH & GO.

Material

• Stainless steel 1.4305, black

Assembly

Mounting into wood (picture 1 und picture 3)

• Insert location hole and pilot hole for safety bolt according to specifications
• Optionally recommended is the use of adhesive for securing
• Press in bushing
• Secure bushing with a screw

Note: The bore diameter (D2) for the pilot hole of the safety bolt depends on the screw used. 

Mounting into plastic (picture 2)

• Insert location hole according specifications
• Optionally recommended is the use of adhesive for securing
• Screw in bushing

Note:The bore diameter to be chosen for the location hole depends on the hardness of the plastic. 

Characteristic

At l1 = 1,5: marking line